|
To continue
to provide services engineering, managing, supervising, coordinating,
design, complex telecommunications, low voltage electrical systems, and
Wired/Wireless networks for all industries and environments. Well
experienced in the deployment of services. Skilled in various trades
in construction and industrial environments to work in any condition.
Computer
Network
Administration
August 2009 – December 2009
New Horizons
Computer Learning Center, Anaheim,
CA
CompTIA
Network+(Certified 2010), CISCO Network Administration
Studies
focused in network administration, development, IT project management. The
CISCO Systems course focused on networking fundamentals, configurations,
command line, design, technical planning, and network interconnectivity.
Information
Technology
November
2005 – March 2006
Institute of
Network Technology, Signal Hill, CA
Studies
focused in 3 courses: Computer Repair based on CompTIA A+ curriculum,
Windows XP Professional administration/configuration/troubleshooting,
Windows Server 2003 administration.
BISCI
Premise Telecommunications
Advantage
Communications Schools, Long Beach,
CA
August 1998 – September 1998
Studies
focused on literature and hands on training of telecom service entrance,
equipment & telecom closets, telecom administration, building backbone
systems, construction specifications, horizontal cabling, and principles of
transmission, fiber optic technology, and media compatibility.
Business
Management
Long Beach
City College, Long Beach,
CA
1996 – 2000
Studies
consisted of various classes in business management, supervising,
accounting, and communications.
EXPERIENCE
IT
Infrastructure Project Network Engineer
Apollo
Professional Solutions, Inc, Lakewood,
CA. 866-277-3343 May 2014 – Present
·
Contracted
Professional to the LAUSD ITD Design Quality Assurance Branch. Validate new equipment installation and operation, test
all wired and wireless network systems according to specifications.
Verify equipment inventory, documentation, close out individual sites Test
& Acceptance.
·
IT Site
Assessment Surveys of various Low Voltage Systems at Los Angeles Unified
School District facilities. Gather data collected from inspecting
cabling and systems, document, comment, write Scope of Work, input data on
to spreadsheets, submit to higher management.
Wireless
Network Engineer/Surveyor
Synaptek
Corporation, Reston, VA 703-956-3560
Feb. 2013 – May 2013
·
Design
WiFi networks for the U.S. Department of Veterans Affairs Hospitals
across the USA. Travel to various locations in teams and begin
wireless site survey and design with the use of Cisco AIR-AP1131, Proxim
Wireless card, issued laptops with Fluke AirMagnet Surveyor and Spectrum
Analyzer software, Adobe software, Microsoft Office Excel/Word, and other
equipment for project design.
·
Design
Documentation as well as the As Built Documentation for wireless heat maps
and input floor plan design data. Then synchronize progress on a
daily basis to servers for back up. Generate heat maps and verify
coverage in 2.4ghz and 5ghz, 802.11a/b/g/n standards.
·
Coordinate
with site client contact on schedule and take inventory of Telco locations
and verify if network and cabling equipment can facilitate new WiFi design
and walk site location with installation contractor for installation
requirements and verification. Submit documentation to management and
verify all heat maps and data for client submittal. Obtained Security
Clearance by the Department of Veterans Affairs to work.
Wireless
Network Engineer
Computer
Resource Solutions, Itasca, Il
630-467-1010 Aug.
2011 – Oct 2011
·
Design
WiFi networks for the U.S. Department of Veterans Affairs Hospitals
across the U.S.. Travel to various locations in teams and begin
wireless site survey and design with the use of Cisco AIR-AP1242AG Access
Points, issued laptops with Fluke AirMagnet Surveyor software, Adobe
software, Microsoft Office apps, and other equipment for project
design.
·
Design
Documentation as well as the As Built Documentation for wireless heat maps
and input floor plan design data. Then synchronize progress on a
daily basis to servers for back up. Generate heat maps and verify
coverage in 2.4ghz and 5ghz, 802.11a/b/g/n standards. Obtained
Security Clearance by the Department of Veterans Affairs to work.
Field Site
Supervisor, Low Voltage Systems
Datastar USA, Torrance, CA 800-621-6449
July 2010 – April 2011
·
Manage
and supervise up to 15 technicians and electricians on various assignments
associated with voice/data/CCTV/security/AV/paging/electrical/telecom systems and
LAN/WLAN equipment installation. Project was estimated at $450,000
and was completed below budget.
·
Coordinate
with General Contractor, other construction trades, and network
engineers and designers to accomplish tasks safely and on schedule and
update blue prints. Attend daily and weekly job meetings on progress
and field changes.
·
Conduct
safety meetings and assess individual qualifications. Operate
heavy equipment such as scissor lifts and boom lifts ranging from 20ft –
125ft. Inspect installation and quality of work, QA &
QC. Project was Kroger Distribution Center in Compton,
California.
·
Also was
a field lead for a large 7eleven digital signage project to install digital
media equipment. Corresponded to Network Operation Center technicians
to complete individual projects and verify communications, verify equipment
asset tags and serial #’s, IP addresses, and digital media.
Lead Integration
Services Technician, Network Engineer
Vector
Resources Inc., Torrance, CA
310-436-1000 March 2002 – May 2008
·
Lead
teams of up to 20 technicians and engineers for the installation and
integration of wired and wireless network systems for the Los Angeles
Unified School District campuses from K-12, with various projects
estimating to over $500,000. Coordinated between trades
during construction, installation, and modifications.
·
Implement
processes and instruct procedures for network
cutovers, rack and stack of network equipment hardware (Cisco routers
2800-4750 series, Switches 2900-6500 catalyst series, Aironet AIR-AP1242
access points), TrippLite 1000-6000 series back-up power
(UPS), patching and cross-connecting between MDF/IDF’s/LDF’s/WDF’s.
·
Maintain connectivity
of existing network during migration to new infrastructure. Conduct
audits, asset management, inventory of all material and equipment
installed, provide daily progress reports, update blue prints and
Visio equipment layout forms, presented all results to senior
management.
·
Supervise
daily activities of network integration to ensure minimal
downtime. On Call Technical Support during integration and
repair any problem pertaining to the whole job from cabling, electrical, PC
workstations, and promote professional client communication.
·
Survey and
engineer environment for Wireless LAN requirements for
802.11a/b/g/n standards, install devices and
components, configure, test power and signals,
and update heat maps.
·
Finalize
project and walk sites with LAUSD inspectors and provide all
configurations and test results for wired and
wireless networks and verified all equipment is operational to
clients in order to have them sign off job completion documentation.
Experienced with Cisco, Alcatel, and Omni network devices and system
connectivity.
Lead
Technician, Low Voltage Systems
Vector
Resources Inc, Torrance, CA 310-436-1000
Sept. 1998 – Sept. 2000
·
Lead
and managed installation and construction of various OSP and
ISP structured low voltage cabling systems for
telecommunications/voice/data/electrical/AV/CCTV.
·
Supervised
and trained employee’s and assessed qualifications on various
functions. Built and mentored cohesive, qualified teams committed to
meeting schedule and budgetary needs and documentation.
·
Experienced
in a wide variety of environments: inside and outside
plant, central office, data centers, ISP’s, school
campus, private, commercial, industrial, and
manufacturing, banks, and film and production studios.
·
Updated
blue prints and AS Built according to infrastructure.
Transfield Services, Carson, CA. May ’08 – Nov ‘14 (On and off
during turnaround
contracts)
Industrial Maintenance
Mechanic – (Boilermaker)
Installing
isolation blinds from 1/2” – 16” 150 – 1500 psi, mechanical
disconnects and reconnects as directed by supervisor. Operating
machinery and tooling necessary to cut, thread, and install pipe.
Disconnecting and reinstalling tubing and tubing fittings. Removing
and reinstalling various types and sizes of valves. Removing and
reinstalling heat exchanger bundles and components in the field with use of
extractor truck, cranes, and rigging equipment. Perform shop and
field hydro testing on piping and heat exchangers and components.
Isolate, opening, and closing towers, vessels, heaters, and other process
equipment as directed by supervisor. Remove and reinstalls tower tray
parts and other vessel internal parts. Perform hazardous tasks
under supplied fresh air lines and full face respirators. Taking
field measurements and assessments, interprets isometric
drawings. Perform basic rigging work for removal of heavy
equipment up to 25,000 lbs. Experienced operating
forklifts, scissor lifts, boom lifts, and work with cranes and
operators, and experienced in communication of hand signals.
Brinderson,
Carson, CA. Apr 2013 – Feb 2014 (On and off during
turnaround contracts)
Industrial Maintenance
Mechanic – (Boilermaker)
|